APEX
APEX TELECOMMUNICATIONS SERVICES, INC.
505 N SAM HOUSTON PKWY E
SUITE 340
HOUSTON, TX 77060
ph: 281.847.1921
fax: 281.847.3855
herbert
Steps to set time and date on various systems is supplied on this page. Please find your system and follow the instructions.
Changing the time on a Panasonic KX-TD, KX-TDA or KX-TDE digital system can be done from any display phone. | |
1. | Enter programming mode by pressing "PROGRAM" button then "STAR" button twice, followed by 1, 2, 3, 4 |
2. | Enter program "000" and press Enter |
3. | Press "SPEAKER" button two times, you will see the time. |
4. | Enter the correct hour. |
5. | Press "FORWARD/DND" button to advance to the minute selection |
6. | Enter the correct minutes (if necessary to update). |
7. | Press "FORWARD/DND" button to advance to the AM/PM selection. |
8. | Press "MUTE" button to select AM or PM (if necessary to change). |
9. | Press "STORE" button |
10. | Lift and replace handset to exit the programming mode. |
11. | This will change the time for all of the phones on your phone |
| |
Changing the time on a Panasonic KX-TA624 system must be done from extension # 101 using a display phone. | |
1. | Press the "PROGRAM" button on the face of the phone |
2. | Enter programming mode by pressing "STAR" - "POUND" - "1234" (default password = 1234) |
3. | Enter program # 000 |
4. | Press "SPEAKER" button |
5. | Press "FORWARD/DND" button to change to the hour selection |
6. | Press "TRANSFER" button and enter the hour |
7. | Press "FORWARD/DND" button to change to the minutes parameter |
8. | Press "TRANSFER" button and enter the minutes |
9. | Press "FORWARD/DND" button to change to the AM/PM parameter |
10. | Press "MUTE" button to select AM or PM |
11. | Press "STORE" button (listen for 1 tone if procedure was executed correctly / 3 tones if procedure failed) |
12. | Press "HOLD" button |
13. | Press the "PROGRAM" button on the face of the phone |
Changing Time on Norstar CICS and MICS Rrelease 6.1 or higher. Press Feature ** TIME (8463) Display shows Time 16:24 On the Softkey under the display it says CHANGE If you wish to change the time, press CHANGE, if not press NEXT Once you pressed the CHANGE button the hour displays; If you wish to change the hour, press CHANGE, if not press NEXT Once you pressed the CHANGE button the hour is erased allowing you to enter the new time - enter the new hour in 24 hour format, when OK press NEXT Once you pressed the NEXT button the minutes display; If you wish to change the minutes, press CHANGE, if not press NEXT Once you pressed the CHANGE button the minutes are erased allowing you to enter the new time - enter the new minutes, when OK press NEXT Follow the same procedure for changing the date!
Programming template for M7208 Programming template for M7310, M7324 or T7316e | |
Copyright 2012 APEX TELECOMMUNICATIONS SERVICES, INC.. All rights reserved.
APEX TELECOMMUNICATIONS SERVICES, INC.
505 N SAM HOUSTON PKWY E
SUITE 340
HOUSTON, TX 77060
ph: 281.847.1921
fax: 281.847.3855
herbert